Board Mount Pressure Sensors
TruStability™ SSC Series
Compensated. ±2 %FSS to ±4 %FSS TEB. Ultra-low (differential, gage), low (absolute, diff., gage). Digital or analog output. DIP, SIP, SMT
Pressure Ranges
- ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH20 to ±150 psi
The TruStability® Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range.
The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital.
The SSC Series is calibrated over the temperature range of -20 °C to 85 °C [-4 °F to 185 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.
These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between two pressure ports.
The TruStability® pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O.
All products are designed and manufactured according to ISO 9001 standards.
Others
- Shock
- MIL-STD-202F, Method 213B, Condition F
- Operating Temperature
- -40°C to 85°C [-40°F to 185°F]
- -40 °C to 85 °C [-40 °F to 185 °F]
- Measurement Type
- Absolute
- Gage
- Differential
- Vibration
- MIL-STD-202F, Curve AK (20.7 g random)
- Pressure Range
- 0 psi to 150 psi
- ±15 psi
- ±100 mbar
- 0 mbar to 600 mbar
- 0 psi to 100 psi
- Transfer Function
- 10% to 90% Vsupply
- 10% to 90% of 2<sup>14</sup> counts
- Response Time
- 1 ms max.
- Supply Current
- 2 mA typ.
- 1.6 mA typ.
- 1.6 mA
- Port Style
- HH: fastener mount, dual radial barbed ports, same side
- FN: fastener mount, single axial barbed port
- NN: no ports
- NB: fastener mount, dual axial ports, same side
- AN: single axial barbed port
- LN: single axial barbless port
- RN: single radial barbed port
- MN: manifold mount, outer diameter seal
- DR: dual radial barbed ports, opposite sides
- RR: dual radial barbed ports, same side
- AA: dual axial barbed ports, opposite sides
- HN: fastener mount, single radial barbed port
- SN: manifold mount, inner diameter seal
- Accuracy (Best Fit Straight Line)
- ±0.25%
- Package Type
- SMT
- DIP
- SIP
- Media Compatibility
- Dry gases only
- Liquid media on port 1
- Compensated Temperature Range
- -20°C to 85°C [-4°F to 185°F]
- -20 °C to 85 °C [-4 °F to 185 °F]
- Temperature Compensation
- Yes
- Signal Conditioning
- Amplified
- Output
- Digital I<sup>2</sup>C address: 0x28
- Digital I²C address: 0x38
- Digital I²C address: 0x28
- Digital SPI
- Analog
- Digital I²C address: 0x78
- Supply Voltage
- 3.3 Vdc
- 5 Vdc
- Series Name
- TruStability™ SSC
- Output Calibration
- Yes
- Total Error Band
- ±2 %FSS
- ±5 %FSS
- ±2.5 %FSS
- ±1 %FSS
- Storage Temperature
- -40 °C to 85 °C [-40 °F to 185 °F]
Others
- Shock
- MIL-STD-202F, Method 213B, Condition F
- Operating Temperature
- -40°C to 85°C [-40°F to 185°F]
- -40 °C to 85 °C [-40 °F to 185 °F]
- Measurement Type
- Absolute
- Gage
- Differential
- Vibration
- MIL-STD-202F, Curve AK (20.7 g random)
- Pressure Range
- 0 psi to 150 psi
- ±15 psi
- ±100 mbar
- 0 mbar to 600 mbar
- 0 psi to 100 psi
- Transfer Function
- 10% to 90% Vsupply
- 10% to 90% of 2<sup>14</sup> counts
- Response Time
- 1 ms max.
- Supply Current
- 2 mA typ.
- 1.6 mA typ.
- 1.6 mA
- Port Style
- HH: fastener mount, dual radial barbed ports, same side
- FN: fastener mount, single axial barbed port
- NN: no ports
- NB: fastener mount, dual axial ports, same side
- AN: single axial barbed port
- LN: single axial barbless port
- RN: single radial barbed port
- MN: manifold mount, outer diameter seal
- DR: dual radial barbed ports, opposite sides
- RR: dual radial barbed ports, same side
- AA: dual axial barbed ports, opposite sides
- HN: fastener mount, single radial barbed port
- SN: manifold mount, inner diameter seal
- Accuracy (Best Fit Straight Line)
- ±0.25%
- Package Type
- SMT
- DIP
- SIP
- Media Compatibility
- Dry gases only
- Liquid media on port 1
- Compensated Temperature Range
- -20°C to 85°C [-4°F to 185°F]
- -20 °C to 85 °C [-4 °F to 185 °F]
- Temperature Compensation
- Yes
- Signal Conditioning
- Amplified
- Output
- Digital I<sup>2</sup>C address: 0x28
- Digital I²C address: 0x38
- Digital I²C address: 0x28
- Digital SPI
- Analog
- Digital I²C address: 0x78
- Supply Voltage
- 3.3 Vdc
- 5 Vdc
- Series Name
- TruStability™ SSC
- Output Calibration
- Yes
- Total Error Band
- ±2 %FSS
- ±5 %FSS
- ±2.5 %FSS
- ±1 %FSS
- Storage Temperature
- -40 °C to 85 °C [-40 °F to 185 °F]
- Shock : MIL-STD-202F, Method 213B, Condition F
- Operating Temperature : -40°C to 85°C [-40°F to 185°F]|-40 °C to 85 °C [-40 °F to 185 °F]
- Measurement Type : Absolute|Gage|Differential
- Vibration : MIL-STD-202F, Curve AK (20.7 g random)
- Pressure Range : 0 psi to 150 psi|±15 psi|±100 mbar|0 mbar to 600 mbar|0 psi to 100 psi
- Transfer Function : 10% to 90% Vsupply|10% to 90% of 214 counts
- Response Time : 1 ms max.
- Supply Current : 2 mA typ.|1.6 mA typ.|1.6 mA
- Port Style : HH: fastener mount, dual radial barbed ports, same side|FN: fastener mount, single axial barbed port|NN: no ports|NB: fastener mount, dual axial ports, same side|AN: single axial barbed port|LN: single axial barbless port|RN: single radial barbed port|MN: manifold mount, outer diameter seal|DR: dual radial barbed ports, opposite sides|RR: dual radial barbed ports, same side|AA: dual axial barbed ports, opposite sides|HN: fastener mount, single radial barbed port|SN: manifold mount, inner diameter seal
- Accuracy (Best Fit Straight Line) : ±0.25%
- Package Type : SMT|DIP|SIP
- Media Compatibility : Dry gases only|Liquid media on port 1
- Compensated Temperature Range : -20°C to 85°C [-4°F to 185°F]|-20 °C to 85 °C [-4 °F to 185 °F]
- Temperature Compensation : Yes
- Signal Conditioning : Amplified
- Output : Digital I2C address: 0x28|Digital I²C address: 0x38|Digital I²C address: 0x28|Digital SPI|Analog|Digital I²C address: 0x78
- Supply Voltage : 3.3 Vdc|5 Vdc
- Series Name : TruStability™ SSC
- Output Calibration : Yes
- Total Error Band : ±2 %FSS|±5 %FSS|±2.5 %FSS|±1 %FSS
- Storage Temperature : -40 °C to 85 °C [-40 °F to 185 °F]