Flush Pressure Transducers
Model A-105
Flush diaphragm pressure transducers. 100 psi to 15,000 psi. 0.50 % full-scale accuracy
The Model A-105 gauge pressure transducers are manufactured with a unitized 17-4 PH stainless steel, wetted diaphragm. The advantage of this type of design is that a thin diaphragm and heavy sidewalls are made from one piece of stainless steel. This unitized diaphragm is rugged, but at the same time, can be made thin enough to measure low pressures.
Available pressure ranges span from 100 psig to 15,000 psig. These models can be used in corrosive fluid environments. The Model A-105 has welded electrical connectors as an integral part of the transducer body and recommended for applications involving rough handling, or where an all-welded, stainless steel transducer is required. All units have four (4) active bonded strain gauges arranged in a Wheatstone-bridge configuration.
Features
- 100 psig to 15000 psig range
- Flush mount design
- No dead volume
- Miniature footprint
- Stainless steel
- CE approved
Others
- Overload (burst)
- 400 %/ < 25k
- 400%/ < 25k
- Shunt Calibration Data
- Included
- Pressure Range
- 2,000 psi
- 1,000 psi
- 200 psi
- 3,000 psi
- Pressure Unit
- Gage
- Non-linearity and Hysteresis
- ±0.05 %FS
- Temperature (Compensated)
- 16 °C to 71 °C [60 °F to 160 °F]
- Pressure Port
- 7/16-20 UNF male
- Product Dimensions
- Ø9,01 mm x 45,72 mm L [Ø0.355 in x 1.8 in L]
- Proof Pressure
- 400 % (max. 25k psi)
- UNSPSC Commodity
- 41112110 Pressure Transducer
- Form Factor
- Flush
- Temperature Effect (Span)
- 0.02 %reading/°F
- Accuracy
- 0.5 %FS
- Temperature Effect (Zero)
- 0.01 %FS/°F
- Output
- 2 mV/V nominal
- Agency Approvals and Standards
- CE approved
- Overload (safe)
- 50 % over capacity
- Insulation Resistance
- 5000 mOhm @ 50 Vdc
- Mating Connector
- PT06A-10-6S or equiv. (AA111)
- Electrical Termination (std)
- PTIH-10-6P or equiv. (hermetic stainless)
- Case Material
- Stainless Steel
- UNSPSC Code
- 41112110
- Bridge Resistance
- 350 Ohm
- Temperature (Operating)
- -54 °C to 149 °C [-65 °F to 300 °F]
- Wetted Parts Material
- 17-4 PH Stainless Steel
- Dead Volume
- Flush diaphragm
- Media
- Gases, liquids compatible with wetted parts
- Non-repeatability
- ±0.1 %FS
- Weight
- 2 oz
- Strain Gage Type
- Bonded foil
- Series Name
- A-105
- Resolution
- Infinite
Others
- Overload (burst)
- 400 %/ < 25k
- 400%/ < 25k
- Shunt Calibration Data
- Included
- Pressure Range
- 2,000 psi
- 1,000 psi
- 200 psi
- 3,000 psi
- Pressure Unit
- Gage
- Non-linearity and Hysteresis
- ±0.05 %FS
- Temperature (Compensated)
- 16 °C to 71 °C [60 °F to 160 °F]
- Pressure Port
- 7/16-20 UNF male
- Product Dimensions
- Ø9,01 mm x 45,72 mm L [Ø0.355 in x 1.8 in L]
- Proof Pressure
- 400 % (max. 25k psi)
- UNSPSC Commodity
- 41112110 Pressure Transducer
- Form Factor
- Flush
- Temperature Effect (Span)
- 0.02 %reading/°F
- Accuracy
- 0.5 %FS
- Temperature Effect (Zero)
- 0.01 %FS/°F
- Output
- 2 mV/V nominal
- Agency Approvals and Standards
- CE approved
- Overload (safe)
- 50 % over capacity
- Insulation Resistance
- 5000 mOhm @ 50 Vdc
- Mating Connector
- PT06A-10-6S or equiv. (AA111)
- Electrical Termination (std)
- PTIH-10-6P or equiv. (hermetic stainless)
- Case Material
- Stainless Steel
- UNSPSC Code
- 41112110
- Bridge Resistance
- 350 Ohm
- Temperature (Operating)
- -54 °C to 149 °C [-65 °F to 300 °F]
- Wetted Parts Material
- 17-4 PH Stainless Steel
- Dead Volume
- Flush diaphragm
- Media
- Gases, liquids compatible with wetted parts
- Non-repeatability
- ±0.1 %FS
- Weight
- 2 oz
- Strain Gage Type
- Bonded foil
- Series Name
- A-105
- Resolution
- Infinite
- Overload (burst) : 400 %/ < 25k|400%/ < 25k
- Shunt Calibration Data : Included
- Pressure Range : 2,000 psi|1,000 psi|200 psi|3,000 psi
- Pressure Unit : Gage
- Non-linearity and Hysteresis : ±0.05 %FS
- Temperature (Compensated) : 16 °C to 71 °C [60 °F to 160 °F]
- Pressure Port : 7/16-20 UNF male
- Product Dimensions : Ø9,01 mm x 45,72 mm L [Ø0.355 in x 1.8 in L]
- Proof Pressure : 400 % (max. 25k psi)
- UNSPSC Commodity : 41112110 Pressure Transducer
- Form Factor : Flush
- Temperature Effect (Span) : 0.02 %reading/°F
- Accuracy : 0.5 %FS
- Temperature Effect (Zero) : 0.01 %FS/°F
- Output : 2 mV/V nominal
- Agency Approvals and Standards : CE approved
- Overload (safe) : 50 % over capacity
- Insulation Resistance : 5000 mOhm @ 50 Vdc
- Mating Connector : PT06A-10-6S or equiv. (AA111)
- Electrical Termination (std) : PTIH-10-6P or equiv. (hermetic stainless)
- Case Material : Stainless Steel
- UNSPSC Code : 41112110
- Bridge Resistance : 350 Ohm
- Temperature (Operating) : -54 °C to 149 °C [-65 °F to 300 °F]
- Wetted Parts Material : 17-4 PH Stainless Steel
- Dead Volume : Flush diaphragm
- Media : Gases, liquids compatible with wetted parts
- Non-repeatability : ±0.1 %FS
- Weight : 2 oz
- Strain Gage Type : Bonded foil
- Series Name : A-105
- Resolution : Infinite