https://sps.honeywell.com/ca/en/search-results.html

Supplied Air Respirators (SAR)

CF2000 Series Supplied Air for Tight Fitting Facepieces

Converts the 5500 and 7700 Series half masks, and the 5400 and 7600 Series full facepieces into a continuous flow supplied air respirator.


Key Features

Breathing tube section close to face is soft and flexible for maximum flexibility. Section behind back will not kink and interrupt air supply. Connects to facepiece cartridge connections quickly and easily - no tools required. Converts the 5500 and 7700 Series half masks, and the 5400 and 7600 Series full facepieces into a continuous flow supplied air respirator. Swivel connection rotates 360 degrees so connection stays secure, no matter how much workers move around. Y' breathing tube design goes over the shoulders so breathing tube is out of the way, lower profile on half masks to fit under welding helmets and faceshields.


Recommended Industries/Use


Hazards


Regulations

  • Regulation - NIOSH certified Type C continuous flow supplied air respirator.


Historical Brand

North


Warranty Information

Honeywell Safety Products warrants the CF2000 Series to the original owner to be free from defects in materials and workmanship for a period of one (1) year from the date of original shipment from Honeywell’s factory. Honeywell’s obligation under this warranty will be, at Honeywell’s option, to repair or replace without charge this respirator or any of its components found by Honeywell to have been defective during the warranty period, under the following terms:1) The warranty claim is made (i) by the owner who purchased this respirator new from Honeywell or an authorized Honeywell Distributor, and (ii) not more than three (3) months after the end of the warranty period. 2) This respirator or component is found by Honeywell to have been defective in normal use and service during the warranty period of one (1) year from the date of purchase by the owner. 3) This respirator or component is returned freight prepaid to Honeywell, either to its factory or to a Honeywell authorized service center, and is thereafter returned to the owner freight collect. 4) This warranty does not apply to (i) any respirator or component found by Honeywell to have become defective as a result of any accident, alteration, misuse, abuse, or servicing with parts not approved by Honeywell; or (ii) deterioration or aging of any component made of rubber or other elastomer since such components can be adversely affected by undue exposure to heat, sun, water, chemicals, ozone or other deteriorating elements; (iii) ) facepiece lens, compressed-air cylinders and parts that become defective through normal use. The decision as to what constitutes normal use shall be made solely by HONEYWELL SAFETY PRODUCTS. 5) To maintain this warranty, the purchaser must perform maintenance and inspections as set forth in the Instruction Manual which shall include prompt replacement or repair of defective parts, and replacement of parts per the maintenance schedule as set forth in the User’s Instructions. THE OWNER ASSUMES ALL OTHER RISKS, IF ANY, SUCH AS THE RISK OF ANY DIRECT, INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE ARISING OUT OF THE USE OF, OR INABLILTY TO USE, THE PRODUCT. SERVICING HONEYWELL SAFETY PRODUCTS RESPIRATORS WITH PARTS NOT APPROVED BY HONEYWELL WILL VOID THIS WARRANTY AND THE NIOSH APPROVAL FOR THE RESPIRATOR UNIT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED AND MAY NOT BE VARIED OR EXTENDED EXCEPT IN WRITING BY AN AUTHORIZED OFFICIAL OF HONEYWELL SAFETY PRODUCTS
Data Sheet
Name
Description
File Size
Date
Size
Cf2000 Series Supplied Air For Tight Fitting Facepieces Datasheet
44.08 KB
10/26/2021
PDF 44.08 KB
Name
Description
File Size
Date
Size
Cf2000 Series Supplied Air For Tight Fitting Facepieces Datasheet
44.08 KB
10/26/2021
PDF 44.08 KB
Image
SKU
Description
alt
CF2401
alt
CF2401S