/content/sps/it/it/search-results.html

Analog Telemetry (WDC) Torque Transducers

Model 2105-WDC

Model 2105-WDC Rotary Measurement System. 5 Channel System, Induced Power. No Batteries Required. Wireless Telemetry

The Model 2100 series rotary torque measurement systems are often well suited for both short- and long-term testing and monitoring of torque or strain on rotating applications where other measurement methods are affected by vibration, dust, moisture, high RPMs, and large axial/radial shaft movements.

Utilizing an existing customer gage shaft assembly, the Honeywell Model 2100 Series Rotary Torque Measurement System takes the strain data from a rotating bridge assembly and converts it to a high level output via wireless telemetry. A combination of up to six transmitters and receivers operating on different frequencies will provide up to six points of measurement on the same shaft. Please contact the factory if more than six points of measurement are required. A scalable analog output and numeric display readout on the receiver provides an electrical and visual indication of the measurement. The receiver provides controls for gain and zero adjustments, display scaling, and IPS power setting.

Features
  • Quick short-term installation
  • 5 channels of measurement
  • Induced power, no batteries required
  • Wireless telemetry
  • Custom machined, clamp-on collar machined to fit each application
  • Custom machined collar assembly, stationary loop antenna, induced power supply (IPS), and receiver are pre-tested as a set at the factory, enabling quick installation and setup of the system for the user
Scheda Tecnica
Nome
Descrizione
Dimensione file
Data
Dimensione
Test & Measurement Torque Accessories Datasheet
application/pdf 585.15 KB
9/20/2021
585.15 KB
Model 2101 to 2106 Rotary Measurement System Datasheet
application/pdf 224.02 KB
9/20/2021
224.02 KB
Manuali e Guide
Nome
Descrizione
Dimensione file
Data
Dimensione
T&M Torque Transducer Range Guide
application/pdf 3.05 MB
9/20/2021
3.05 MB
Opuscolo
Nome
Descrizione
Dimensione file
Data
Dimensione
White Paper: New Ways to Measure Torque
application/pdf 195.77 KB
9/20/2021
195.77 KB
T&M Overview Brochure
application/pdf 418.77 KB
9/20/2021
418.77 KB
Nota Applicativa
Nome
Descrizione
Dimensione file
Data
Dimensione
Aerospace Test and Measurement Capabilities
application/pdf 1.94 MB
9/20/2021
1.94 MB
Nome
Descrizione
Dimensione file
Data
Dimensione
T&M Torque Transducer Range Guide
3.05 MB
9/20/2021
3.05 MB
White Paper: New Ways to Measure Torque
195.77 KB
9/20/2021
195.77 KB
Aerospace Test and Measurement Capabilities
1.94 MB
9/20/2021
1.94 MB
Test & Measurement Torque Accessories Datasheet
585.15 KB
9/20/2021
585.15 KB
T&M Overview Brochure
418.77 KB
9/20/2021
418.77 KB
Model 2101 to 2106 Rotary Measurement System Datasheet
224.02 KB
9/20/2021
224.02 KB
Nome
Descrizione
Dimensione file
Data
Dimensione
Test & Measurement Torque Accessories Datasheet
585.15 KB
9/20/2021
Model 2101 to 2106 Rotary Measurement System Datasheet
224.02 KB
9/20/2021
T&M Torque Transducer Range Guide
3.05 MB
9/20/2021
White Paper: New Ways to Measure Torque
195.77 KB
9/20/2021
T&M Overview Brochure
418.77 KB
9/20/2021
Aerospace Test and Measurement Capabilities
1.94 MB
9/20/2021