Thermostats
3153 Series
Compact, low profile. Hermetically sealed. Tight tolerances & differentials. Pre-set & tamper proof. SPST contacts. Mounting brackets, terminals
The 3153 Series consists of a single pole, single throw switch activated by a snap action bimetal disc. Temperature calibrations are pre-set at the factory, and each unit is 100% thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically sealed steel housing, with a glass-to-metal seal at the terminal junction. The low silhouette and compact design often make it especially well-suited for applications that require miniaturization. Acceptance testing is performed in accordance with MIL-S-24236, Table III.
Features
- Hermetically sealed
- Tight tolerances
- Tight differentials
- Hi-Rel
Potential Applications
- Military and commercial aircraft
Others
- Shock
- MIL-STD-202, Method 213; 100 G
- Thermostat Environmental Exposure Range
- -65 °C to 260 °C [-85 °F to 500 °F]
- Agency Approvals and Standards
- Acceptance testing performed in accordance to MIL-PRF-24236, Table III
- Thermostat Contact Resistance
- MIL-STD-202, Method 307; 0.050 Ohm max.
- Operating Temperature
- -29 °C to 177 °C [-20 °F to 350 °F]
- Insulation Resistance
- MIL-STD-202, Method 302; 500 MOhm
- Dielectric Strength
- MIL-STD-202, Method 301; 1250 Vac 60 Hz - Terminal to Case
- Thermal Shock
- MIL-STD-202, Method 107; Cond. B
- Salt Spray
- MIL-STD-202, Method 101; Cond. B
- Vibration
- MIL-STD-202, Method 204; 20 G
- Seal Type
- MIL-STD-202, Method 112; Cond. C
- Humidity
- MIL-STD-202, Method 106
Others
- Shock
- MIL-STD-202, Method 213; 100 G
- Thermostat Environmental Exposure Range
- -65 °C to 260 °C [-85 °F to 500 °F]
- Agency Approvals and Standards
- Acceptance testing performed in accordance to MIL-PRF-24236, Table III
- Thermostat Contact Resistance
- MIL-STD-202, Method 307; 0.050 Ohm max.
- Operating Temperature
- -29 °C to 177 °C [-20 °F to 350 °F]
- Insulation Resistance
- MIL-STD-202, Method 302; 500 MOhm
- Dielectric Strength
- MIL-STD-202, Method 301; 1250 Vac 60 Hz - Terminal to Case
- Thermal Shock
- MIL-STD-202, Method 107; Cond. B
- Salt Spray
- MIL-STD-202, Method 101; Cond. B
- Vibration
- MIL-STD-202, Method 204; 20 G
- Seal Type
- MIL-STD-202, Method 112; Cond. C
- Humidity
- MIL-STD-202, Method 106
- Shock : MIL-STD-202, Method 213; 100 G
- Thermostat Environmental Exposure Range : -65 °C to 260 °C [-85 °F to 500 °F]
- Agency Approvals and Standards : Acceptance testing performed in accordance to MIL-PRF-24236, Table III
- Thermostat Contact Resistance : MIL-STD-202, Method 307; 0.050 Ohm max.
- Operating Temperature : -29 °C to 177 °C [-20 °F to 350 °F]
- Insulation Resistance : MIL-STD-202, Method 302; 500 MOhm
- Dielectric Strength : MIL-STD-202, Method 301; 1250 Vac 60 Hz - Terminal to Case
- Thermal Shock : MIL-STD-202, Method 107; Cond. B
- Salt Spray : MIL-STD-202, Method 101; Cond. B
- Vibration : MIL-STD-202, Method 204; 20 G
- Seal Type : MIL-STD-202, Method 112; Cond. C
- Humidity : MIL-STD-202, Method 106