https://sps.honeywell.com/us/en/search-results.html

Board Mount Pressure Sensors

Basic ABP Series

Compensated. ±1.5 %FSS TEB. Low pressure. Differential or gage. Digital or analog output. DIP, leadless SMT, SMT. Cost effective

Distributor Inventory

Pressure Ranges
  • >±60 mbar to ±10 bar | ±6 kPa to ±1 MPa | ±1 psi to ±150 psi
Description
  • The ABP Series are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. They are calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. All products are designed and manufactured according to ISO 9001 standards.
  • Dry gases option: The input port is limited to non-corrosive, non-ionic media (e.g., dry air, gases) and should not be exposed to condensation. The gases are limited to media compatible with high temperature polyamide, silicone, alumina ceramic, silicon, gold, and glass.
  • Liquid media option: Includes an additional silicone-based gel coating to protect the electronics under port P1, which enables use with non-corrosive liquids (e.g. water and saline) and in applications where condensation can occur. Since port P2 is designed for use with non-corrosive liquids, this option is often suitable for wet-wet differential sensing.
Value to Customers
  • Simplifies design-in: Small size saves room on the PC board (PCB), or simplifies design in smaller and lower power devices. Meets Moisture Sensitivity Level 1 requirements, which allows for unlimited shelf life when stored at <30 ºC/85 %RH and, under most storage conditions, allows for PCB soldering without any material concern about solder joint quality due to aging of the sensor terminals, which minimizes the concern about aging of the terminals prior PCB assembly. Pressure choices allow engineers to select range required for their application. Leadless SMT, SMT, and DIP package options.
  • Cost-effective: Small size helps engineers reduce design and manufacturing costs while maintaining enhanced performance and reliability of the systems they design.
  • Accurate: Total Error Band (TEB) and wide pressure range enable engineers to optimize system performance by improving resolution and system accuracy. Optional internal diagnostics validate that the sensor readings are correct.
  • Flexible: Supply voltage range, variety of pressure units, types, and ranges, output options, and wide operating temperature range simplify use in the application.
  • Versatile: Wet-media compatibility, sleep mode, and temperature output options make the sensor a versatile choice for Internet of Things applications.
  • Honeywell Brand: Utilize proprietary Honeywell technology, and are protected by multiple global patents.
Differentiation:
  • Enhanced accuracy helps the design engineer fully understand the error in measurement.
  • Wide supply voltage range offers design flexibility.
  • Power consumption when utilizing sleep mode option allows for use in battery-powered applications.

Others

  • Shock
    • 100 g, 6 ms duration
  • Operating Temperature
    • -40°C to 85°C [-40°F to 185°F]
  • Measurement Type
    • Gage
    • Differential
  • Vibration
    • 15 g, 10 Hz to 2 kHz
  • Pressure Range
    • 0 psi to 30 psi
    • 0 psi to 15 psi
    • 0 mbar to 100 mbar
    • 0 psi to 1 psi
    • 0 psi to 5 psi
    • 0 mbar to 600 mbar
    • 0 mbar to 60 mbar
    • 0 bar to 4 bar
    • 0 bar to 10 bar
  • Transfer Function
    • 10% to 90% of Vsupply, no temperature output, no sleep mode
    • 2<sup>14</sup> counts, no temperature output, no sleep mode
  • Response Time
    • 1 ms
    • 0.46 ms
  • Supply Current
    • 5.0 mA typ.
    • 2.1 mA typ.
    • 3.1 mA typ.
  • Port Style
    • JJ: dual radial barbless ports, same side
    • AN: single axial barbed port
    • LN: single axial barbless port
    • RR: dual radial barbed ports, same side
  • Accuracy (Best Fit Straight Line)
    • ±0.25 %FSS
  • Package Type
    • Leadless SMT
    • DIP
    • SMT
  • Compensated Temperature Range
    • 0°C to 50°C [32°F to 122°F]
  • Temperature Compensation
    • Yes
  • Signal Conditioning
    • Amplified
  • Output
    • Analog
    • Digital I<sup>2</sup>C address: 0x28
  • Life
    • 1 million pressure cycles min.
  • Supply Voltage
    • 3.3 Vdc typ.
    • 5 Vdc typ.
  • Series Name
    • Basic ABP
  • Total Error Band
    • ±1.5 %FSS
  • Storage Temperature
    • -40°C to 85°C [-40°F to 185°F]

Others

  • Shock
    • 100 g, 6 ms duration
  • Operating Temperature
    • -40°C to 85°C [-40°F to 185°F]
  • Measurement Type
    • Gage
    • Differential
  • Vibration
    • 15 g, 10 Hz to 2 kHz
  • Pressure Range
    • 0 psi to 30 psi
    • 0 psi to 15 psi
    • 0 mbar to 100 mbar
    • 0 psi to 1 psi
    • 0 psi to 5 psi
    • 0 mbar to 600 mbar
    • 0 mbar to 60 mbar
    • 0 bar to 4 bar
    • 0 bar to 10 bar
  • Transfer Function
    • 10% to 90% of Vsupply, no temperature output, no sleep mode
    • 2<sup>14</sup> counts, no temperature output, no sleep mode
  • Response Time
    • 1 ms
    • 0.46 ms
  • Supply Current
    • 5.0 mA typ.
    • 2.1 mA typ.
    • 3.1 mA typ.
  • Port Style
    • JJ: dual radial barbless ports, same side
    • AN: single axial barbed port
    • LN: single axial barbless port
    • RR: dual radial barbed ports, same side
  • Accuracy (Best Fit Straight Line)
    • ±0.25 %FSS
  • Package Type
    • Leadless SMT
    • DIP
    • SMT
  • Compensated Temperature Range
    • 0°C to 50°C [32°F to 122°F]
  • Temperature Compensation
    • Yes
  • Signal Conditioning
    • Amplified
  • Output
    • Analog
    • Digital I<sup>2</sup>C address: 0x28
  • Life
    • 1 million pressure cycles min.
  • Supply Voltage
    • 3.3 Vdc typ.
    • 5 Vdc typ.
  • Series Name
    • Basic ABP
  • Total Error Band
    • ±1.5 %FSS
  • Storage Temperature
    • -40°C to 85°C [-40°F to 185°F]
  • Shock : 100 g, 6 ms duration
  • Operating Temperature : -40°C to 85°C [-40°F to 185°F]
  • Measurement Type : Gage|Differential
  • Vibration : 15 g, 10 Hz to 2 kHz
  • Pressure Range : 0 psi to 30 psi|0 psi to 15 psi|0 mbar to 100 mbar|0 psi to 1 psi|0 psi to 5 psi|0 mbar to 600 mbar|0 mbar to 60 mbar|0 bar to 4 bar|0 bar to 10 bar
  • Transfer Function : 10% to 90% of Vsupply, no temperature output, no sleep mode|214 counts, no temperature output, no sleep mode
  • Response Time : 1 ms|0.46 ms
  • Supply Current : 5.0 mA typ.|2.1 mA typ.|3.1 mA typ.
  • Port Style : JJ: dual radial barbless ports, same side|AN: single axial barbed port|LN: single axial barbless port|RR: dual radial barbed ports, same side
  • Accuracy (Best Fit Straight Line) : ±0.25 %FSS
  • Package Type : Leadless SMT|DIP|SMT
  • Compensated Temperature Range : 0°C to 50°C [32°F to 122°F]
  • Temperature Compensation : Yes
  • Signal Conditioning : Amplified
  • Output : Analog|Digital I2C address: 0x28
  • Life : 1 million pressure cycles min.
  • Supply Voltage : 3.3 Vdc typ.|5 Vdc typ.
  • Series Name : Basic ABP
  • Total Error Band : ±1.5 %FSS
  • Storage Temperature : -40°C to 85°C [-40°F to 185°F]
Data Sheet
Name
Description
File Size
Date
Size
Basic Board Mount Pressure Sensors ABP Series—High Accuracy, Compensated/Amplified, 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi, Digital or Analog Output, Liquid Media Capable
2.16 MB
2/4/2021
PDF 2.16 MB
Basic Board Mount Pressure Sensors: ABP Series for Use In Medical Ventilators, Comp/Amp
1.55 MB
12/3/2020
PDF 1.55 MB
Manuals and Guides
Name
Description
File Size
Date
Size
Airflow sensors contain advanced microstructure technology to provide a sensitive and fast response to flow, amount/direction of air or other gases. Potential applications include HVAC, gas metering, chromatography, vent hoods, and medical equipment.
4.14 MB
1/11/2021
PDF 4.14 MB
Board Mount Pressure Sensors Selection Guide
1.15 MB
12/3/2020
PDF 1.15 MB
Installation Instructions
Name
Description
File Size
Date
Size
Installation Instructions for the Basic Amplified Board Mount Pressure Sensors, ABP Series
1.63 MB
2/3/2021
PDF 1.63 MB
Technical Note
Name
Description
File Size
Date
Size
Pressure Sensor Surface Mount (SMT) Guidelines
1.69 MB
2/3/2021
PDF 1.69 MB
Auto-Zero Calibration Technique for Pressure Sensors
721.93 KB
1/11/2021
PDF 721.93 KB
Diagnostics for TruStability™ HSC and SSC Series, and Basic ABP Series Board Mount Pressure Sensors; FSA Series Force Sensors
186.84 KB
1/11/2021
PDF 186.84 KB
Sleep Mode for Use with Honeywell Digital Pressure Sensors: ASDX Series, APB Series, and Trustability® HSC, SSC Series
329.92 KB
1/11/2021
PDF 329.92 KB
Energy and Environmental Design Trends
828.15 KB
1/11/2021
PDF 828.15 KB
Pressure or Airflow Sensors?
553.46 KB
1/11/2021
PDF 553.46 KB
Liquid Level Height Sensing Using Selected Honeywell Board Mount Pressure Sensors: MPR, ABP, and TBP Series
1.05 MB
1/11/2021
PDF 1.05 MB
ABP Series Pneumatic Interface Recommendations
399.7 KB
12/3/2020
PDF 399.7 KB
SPI Communication with Honeywell Digital Output Pressure Sensors
210.39 KB
12/3/2020
PDF 210.39 KB
Pressure Sensor Glossary of Terms
129.79 KB
12/3/2020
PDF 129.79 KB
White Paper
Name
Description
File Size
Date
Size
The Economics of Accuracy in Low-Cost, High-Volume Medical Applications
2.25 MB
1/11/2021
PDF 2.25 MB
The High Cost of Low Cost Pressure Sensors
735.18 KB
12/3/2020
PDF 735.18 KB
Measuring Pressure in Chemistry Analyzers
2.72 MB
1/11/2021
PDF 2.72 MB
Application Note
Name
Description
File Size
Date
Size
Solutions for Oxygen Concentrators
2.3 MB
1/11/2021
PDF 2.3 MB
Sensors and Switches: Solutions for Medical Applications
1.35 MB
1/11/2021
PDF 1.35 MB
Solutions for Ventilators
2.8 MB
1/11/2021
PDF 2.8 MB
Solutions For Healthier Air & HVAC Systems
3.76 MB
4/13/2021
PDF 3.76 MB
Sensors in Sleep Apnea Machines
1.88 MB
1/11/2021
PDF 1.88 MB
Basic Board Mount Pressure Sensors: ABP Series
421.93 KB
12/3/2020
PDF 421.93 KB
Sensors and Switches for HVAC Applications
4.51 MB
1/11/2021
PDF 4.51 MB
Sensor Use in Building Energy Conservation
2.52 MB
12/3/2020
PDF 2.52 MB
Solutions for Infusion Pumps
2.36 MB
12/3/2020
PDF 2.36 MB
Industrial Warehouse Solutions
2.85 MB
5/10/2021
PDF 2.85 MB
Product Photo
Name
Description
File Size
Date
Size
Basic ABP Series Product Photo - grouped
835.5 KB
4/21/2021
835.5 KB
Name
Description
File Size
Date
Size
Solutions for Oxygen Concentrators
2.3 MB
1/11/2021
PDF 2.3 MB
The Economics of Accuracy in Low-Cost, High-Volume Medical Applications
2.25 MB
1/11/2021
PDF 2.25 MB
Sensors and Switches: Solutions for Medical Applications
1.35 MB
1/11/2021
PDF 1.35 MB
Solutions for Ventilators
2.8 MB
1/11/2021
PDF 2.8 MB
Pressure Sensor Surface Mount (SMT) Guidelines
1.69 MB
2/3/2021
PDF 1.69 MB
Auto-Zero Calibration Technique for Pressure Sensors
721.93 KB
1/11/2021
PDF 721.93 KB
Diagnostics for TruStability™ HSC and SSC Series, and Basic ABP Series Board Mount Pressure Sensors; FSA Series Force Sensors
186.84 KB
1/11/2021
PDF 186.84 KB
Sleep Mode for Use with Honeywell Digital Pressure Sensors: ASDX Series, APB Series, and Trustability® HSC, SSC Series
329.92 KB
1/11/2021
PDF 329.92 KB
Solutions For Healthier Air & HVAC Systems
3.76 MB
4/13/2021
PDF 3.76 MB
Energy and Environmental Design Trends
828.15 KB
1/11/2021
PDF 828.15 KB
Sensors in Sleep Apnea Machines
1.88 MB
1/11/2021
PDF 1.88 MB
Airflow sensors contain advanced microstructure technology to provide a sensitive and fast response to flow, amount/direction of air or other gases. Potential applications include HVAC, gas metering, chromatography, vent hoods, and medical equipment.
4.14 MB
1/11/2021
PDF 4.14 MB
Pressure or Airflow Sensors?
553.46 KB
1/11/2021
PDF 553.46 KB
Liquid Level Height Sensing Using Selected Honeywell Board Mount Pressure Sensors: MPR, ABP, and TBP Series
1.05 MB
1/11/2021
PDF 1.05 MB
ABP Series Pneumatic Interface Recommendations
399.7 KB
12/3/2020
PDF 399.7 KB
Basic Board Mount Pressure Sensors: ABP Series
421.93 KB
12/3/2020
PDF 421.93 KB
Basic Board Mount Pressure Sensors ABP Series—High Accuracy, Compensated/Amplified, 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi, Digital or Analog Output, Liquid Media Capable
2.16 MB
2/4/2021
PDF 2.16 MB
Basic Board Mount Pressure Sensors: ABP Series for Use In Medical Ventilators, Comp/Amp
1.55 MB
12/3/2020
PDF 1.55 MB
Installation Instructions for the Basic Amplified Board Mount Pressure Sensors, ABP Series
1.63 MB
2/3/2021
PDF 1.63 MB
The High Cost of Low Cost Pressure Sensors
735.18 KB
12/3/2020
PDF 735.18 KB
Sensors and Switches for HVAC Applications
4.51 MB
1/11/2021
PDF 4.51 MB
Measuring Pressure in Chemistry Analyzers
2.72 MB
1/11/2021
PDF 2.72 MB
Board Mount Pressure Sensors Selection Guide
1.15 MB
12/3/2020
PDF 1.15 MB
SPI Communication with Honeywell Digital Output Pressure Sensors
210.39 KB
12/3/2020
PDF 210.39 KB
Pressure Sensor Glossary of Terms
129.79 KB
12/3/2020
PDF 129.79 KB
Sensor Use in Building Energy Conservation
2.52 MB
12/3/2020
PDF 2.52 MB
Basic ABP Series Product Photo - grouped
835.5 KB
4/21/2021
835.5 KB
Solutions for Infusion Pumps
2.36 MB
12/3/2020
PDF 2.36 MB
Industrial Warehouse Solutions
2.85 MB
5/10/2021
PDF 2.85 MB