https://sps.honeywell.com/us/en/search-results.html
Outage Notification: On Saturday, June 5,12:30-2:30 p.m. EDT (6:30 to 8:30 p.m. UDT), this website will undergo planned maintenance. Thank you for your patience.

Industrial Fixed

FS7 Flame Detector

FS7 Flame Detector

The FS7 Flame Detector provides an intelligent two-stage response to semiconductor wet bench fires:

Stage 1: Alert. This is the first-stage response to a small fire with a heat energy output of 3 kW (the equivalent of a 4-inch diameter polypropylene pool fire). This allows time for the fire to self-extinguish.

Stage 2: Alarm. If the fire does not self-extinguish, and grows to the Factory Mutual specified heat energy threshold of 13 kW (the equivalent of an 8-inch diameter polypropylene pool fire), the second-stage response is activated.

The FS7-2173 is used with the FS7-130-SX Controller or Control Panel FSWB. Controller and Control Panel supply power to detectors monitor the status of all detectors and communicate with the detectors via the digital RS-485 communication channel. FS7-2173 is supplied with a standard 20 ft. cable connector. Detectors are connected to the controller or control panel using the self-locking connectors and junction boxes. This allows for fast and easy connections eliminating wiring problems. Each detector can store up to six time and date stamped FirePics™ (pre-event multi-spectral sensor array data) in non-volatile memory. Controller and control panel can also store event history table in the non-volatile memory, which contains the time and date stamped alert, alarm and fault histories. FirePics™ and event histories can be retrieved from the controller or control panel.

The FS7-2173-2RP unitized model’s microprocessor, with digital signal processing algorithms, continuously monitors the circuitry, sensor’s built-in self-test and verifies proper operation. FS7-2173-2RP with discrete relay outputs is designed to operate as a stand-alone detector and interface with any approved fire alarm panel. The detector requires an external 24 VDC power source and is supplied with a standard 20 ft. pigtail cable. It can store up to six time and date stamped FirePics™ and 200 events in non-volatile memory. FirePics™ and event histories can be retrieved using a FS7 Interface Kit and the Windows-based PC software.

Additional Features and Benefits

  • Multi-Spectral digital electro-optical radiant energy infrared fire detector
  • Unique two-stage fire detection response
  • Immune to false alarm sources
  • NOT affected by absorbing smoke, gasses or chemical vapors
  • NOT sensitive to background radiant energy from electric heaters and ovens
  • Detects hydrocarbon and non-hydrocarbon fires
  • Rugged leak-proof, heat-sealed, acid-resistant, injection-molded polypropylene housing
  • Wide 120° field-of-view
  • Digital communication with RS-485 interface
  • FirePic™: time and date-stamped digital fire signatures
  • Built-in detector automatic self test
  • Unitzed model design for stand-alone operation

Others

  • Sub-Category
    • Flame Detectors
  • Brand
    • Honeywell

Others

  • Sub-Category
    • Flame Detectors
  • Brand
    • Honeywell
  • Sub-Category : Flame Detectors
  • Brand : Honeywell
Data Sheet
Name
Description
File Size
Date
Size
FS7 Flame Detector Specsheet
application/pdf 156.12 KB
1/10/2022
156.12 KB
Manuals and Guides
Name
Description
File Size
Date
Size
FS7 Flame Detector Installation Guide and Operating Manual
application/pdf 594.04 KB
1/10/2022
594.04 KB
Brochure
Name
Description
File Size
Date
Size
FS7 Flame Detector Brochure
application/pdf 379.49 KB
1/10/2022
379.49 KB
Certificate
Name
Description
File Size
Date
Size
FS7 Flame Detector Certificate of Compliance
application/pdf 86.27 KB
1/10/2022
86.27 KB
FS7 Flame Detector EU Declaration of Conformity
application/pdf 140.09 KB
1/10/2022
140.09 KB
Name
Description
File Size
Date
Size
FS7 Flame Detector Specsheet
156.12 KB
1/10/2022
156.12 KB
FS7 Flame Detector Installation Guide and Operating Manual
594.04 KB
1/10/2022
594.04 KB
FS7 Flame Detector Brochure
379.49 KB
1/10/2022
379.49 KB
FS7 Flame Detector Certificate of Compliance
86.27 KB
1/10/2022
86.27 KB
FS7 Flame Detector EU Declaration of Conformity
140.09 KB
1/10/2022
140.09 KB
Image
SKU
Description
alt
FS7-2173-2RP
FS7 2RP 20'C/41"T pigtail
alt
FS7-2179
Junction Box for connecting Model FS7-2173 Fire Detectors
alt
FS7-2173-RP
FS7 DET 20FT CBL 72IN TFLN VITON 1 RLY
alt
RS-232 CABLE
RS232 CABLE FS7-130-SX/S7-2175 OPTN1-2
alt
CBMO-20
20 ft. cable with Male Lemo connector/open pigtail, (Junction Box to Model FS7-130-SX Controller or Model S7-2175 Control Panel).
alt
CBMM-5
5 ft. cable with Male/Male Lemo connectors, (Junction Box to Junction Box).
alt
PW-3123-0002
Replacement Battery for FT-S7 Tester (1 required)
alt
FT-S7
Test Lamp. Battery operated for testing FS7 Fire Detectors up to 2 ft. distance.
alt
FS7-2173-RPK
FS7 RP DET, 20'C/6'T, KALREZ O-RING
alt
FS7-2173-KALO
Kal-rez O-ring. For use with FS7-130-SX Controller, FSWB Control Panel or S7-2175 Control Panel.