Inline Amplifiers
UBP-10 Series
Universal bipolar strain gauge. 24 to 32 single voltage supply to inline wiring. Programmable gain settings. Wide adjustment range on the zero
The Model UBP-10 bi-polar in-line amplifier supplies a highly-regulated, bridge excitation voltage for the transducer and converts the millivolt signal of the transducer to a ±10 Vdc signal. (-)OUTPUT is biased approximately 1/3 of the supply voltage. The output will swing 0 Vdc to 10 Vdc around the (-)OUTPUT reference voltage. The universal, in-line amplifier features three selectable excitation voltages, programmable gain settings, wide adjustment range on the zero and a buffered solid-state shunt cal relay for quick calibration.
Features
- For replacement only, not to be used in new design
- Strain gage sensor amplifier
- ±5 Vdc output
- ±15 Vdc supply voltage
- NEMA 4 housing
- Selectable excitation voltages: 3 V, 5 V, or 10 V @ 70 mA
- Increases signal-to-noise ratio in noisy environments
- Effects of voltage drops in excitation sources are eliminated
- Signals may be sent to the data systems from low impedence sources
Others
- Current Draw
- 70 mA
- Zero Adjustment Range - Fine
- ±15 %
- Product Dimensions
- Plastic: 63,5 mm H x 96,25 mm L x 53,34 mm D [2.5 in H x 3.75 in L x 2.1 in D]; Aluminum: 76,2 mm H x 127 mm W x 63,5 mm D [3.0 in H x 5.0 in W x 2.5 in D]
- Transducer Type
- Bridge-based sensor
- Shunt Calibration
- Solid state relay on board
- Signal-to-Noise Ratio
- 65 dB
- UNSPSC Commodity
- Amplifiers
- Number of Channels
- 1
- Output
- ±5 Vdc
- Supply Voltage
- ±15 Vdc
- Case Material
- Plastic or Painted Aluminum
- UNSPSC Code
- 32101514
- Temperature (Operating)
- -15 °C to 71 °C [5 °F to 160 °F]
- Input Type
- 24 Vdc to 32 Vdc single voltage supply input
- ±15 Vdc input
- Order Code
- BE126EL,51J
- BE123EL,51J
- Output Current
- 1 mA max.
- Span Adjustment Range
- 0.5 mV/V to 10 mV/V. ±25 % fine
- dc Power Supply Rejection Ratio
- >110 dB
- Signal Output
- ±5 Vdc
- Sealing
- IP66/NEMA4
- Mounting
- #6 or #8 screws
- Linearity
- 0.01 % of full scale
- Transducer Excitation
- 3 Vdc, 5 Vdc, or 10 Vdc @ 70 mA
- Zero Adjustment Range - Coarse
- ±50 %
- Series Name
- UBP-10
Others
- Current Draw
- 70 mA
- Zero Adjustment Range - Fine
- ±15 %
- Product Dimensions
- Plastic: 63,5 mm H x 96,25 mm L x 53,34 mm D [2.5 in H x 3.75 in L x 2.1 in D]; Aluminum: 76,2 mm H x 127 mm W x 63,5 mm D [3.0 in H x 5.0 in W x 2.5 in D]
- Transducer Type
- Bridge-based sensor
- Shunt Calibration
- Solid state relay on board
- Signal-to-Noise Ratio
- 65 dB
- UNSPSC Commodity
- Amplifiers
- Number of Channels
- 1
- Output
- ±5 Vdc
- Supply Voltage
- ±15 Vdc
- Case Material
- Plastic or Painted Aluminum
- UNSPSC Code
- 32101514
- Temperature (Operating)
- -15 °C to 71 °C [5 °F to 160 °F]
- Input Type
- 24 Vdc to 32 Vdc single voltage supply input
- ±15 Vdc input
- Order Code
- BE126EL,51J
- BE123EL,51J
- Output Current
- 1 mA max.
- Span Adjustment Range
- 0.5 mV/V to 10 mV/V. ±25 % fine
- dc Power Supply Rejection Ratio
- >110 dB
- Signal Output
- ±5 Vdc
- Sealing
- IP66/NEMA4
- Mounting
- #6 or #8 screws
- Linearity
- 0.01 % of full scale
- Transducer Excitation
- 3 Vdc, 5 Vdc, or 10 Vdc @ 70 mA
- Zero Adjustment Range - Coarse
- ±50 %
- Series Name
- UBP-10
- Current Draw : 70 mA
- Zero Adjustment Range - Fine : ±15 %
- Product Dimensions : Plastic: 63,5 mm H x 96,25 mm L x 53,34 mm D [2.5 in H x 3.75 in L x 2.1 in D]; Aluminum: 76,2 mm H x 127 mm W x 63,5 mm D [3.0 in H x 5.0 in W x 2.5 in D]
- Transducer Type : Bridge-based sensor
- Shunt Calibration : Solid state relay on board
- Signal-to-Noise Ratio : 65 dB
- UNSPSC Commodity : Amplifiers
- Number of Channels : 1
- Output : ±5 Vdc
- Supply Voltage : ±15 Vdc
- Case Material : Plastic or Painted Aluminum
- UNSPSC Code : 32101514
- Temperature (Operating) : -15 °C to 71 °C [5 °F to 160 °F]
- Input Type : 24 Vdc to 32 Vdc single voltage supply input|±15 Vdc input
- Order Code : BE126EL,51J|BE123EL,51J
- Output Current : 1 mA max.
- Span Adjustment Range : 0.5 mV/V to 10 mV/V. ±25 % fine
- dc Power Supply Rejection Ratio : >110 dB
- Signal Output : ±5 Vdc
- Sealing : IP66/NEMA4
- Mounting : #6 or #8 screws
- Linearity : 0.01 % of full scale
- Transducer Excitation : 3 Vdc, 5 Vdc, or 10 Vdc @ 70 mA
- Zero Adjustment Range - Coarse : ±50 %
- Series Name : UBP-10
Data Sheet
Name
Description
File Size
Date
Size
Test & MeasurementInstrumentation Accessories Datasheet
649.85 KB
9/11/2020
PDF 649.85 KB
Model UBP Universal Bi-Polar In-Line Amplifier Datasheet
243.43 KB
9/11/2020
PDF 243.43 KB
Manuals and Guides
Name
Description
File Size
Date
Size
Model UBP-10 In-Line Transducer Product Manual
411.7 KB
9/11/2020
PDF 411.7 KB
Others
Name
Description
File Size
Date
Size
Name
Description
File Size
Date
Size
Test & MeasurementInstrumentation Accessories Datasheet
649.85 KB
9/11/2020
PDF 649.85 KB
Model UBP-10 In-Line Transducer Product Manual
411.7 KB
9/11/2020
PDF 411.7 KB
Model UBP Universal Bi-Polar In-Line Amplifier Datasheet
243.43 KB
9/11/2020
PDF 243.43 KB